Wood Floor Refinishing in Malibu

3 Mistakes of Floor Sanding While You Refinish the Wood Floor

Do you want to improve the appearance of your floor and enhance your home value? Then, you must opt for floor sanding while you refinish the wood floor. But if you are not experienced enough or hired a contractor who is dealing with the process quite unprofessionally, then the sanding can go wrong. So, to avoid any disaster at the time of wood floor refinishing in Malibu, check these 3 common mistakes.

1.     Insufficient sanding

At the time of sanding, it is necessary to remove all dirt and finish. But as the floorboards are not absolutely flat, hence, it is difficult for a sanding machine to reach all of the corners. As a consequence, a common mistake is some corners are left without sanding. For perfection, you have to continue with sanding till the entire procedure is properly sanded.

2.     Sandpaper with wrong grits

Sandpapers are found in different grits that are applied at the time of the entire sanding procedure to get flawless results. In each stage of sanding in the wood floor refinishing in Malibu, a specific grit is necessary. The type of grit depends on the type of the floor and its condition. Further, the important factors of choosing the grit are previous sanding experiences, finish type, and occurrence of serious damages. But if you make the mistake of using a fine-grit, the sandpaper can clog up quickly. As a result, the process becomes ineffective and you need to bear high costs for replacing the sandpaper.

3.     Using clogged sandpapers

If the sheet is already clogged up, then it must be changed as soon as possible. But often people make a mistake that they keep using the clogged sandpapers and it creates negative impacts on the refinishing project.

To get professional services for wood floor refinishing in Malibu, contact us.